Handheld Detection, Jamming & Spoofing Integrated Device
The DR300-ABC handheld UAV detection and countermeasure device integrates an all-in-one capability of “full-band detection coverage + 8-band jamming countermeasures”, specifically designed for single-operator portable scenarios. It is equipped with a ≥4.3-inch display and supports 360° horizontal direction finding, enabling precise detection within a 2 km range of mainstream drones such as DJI and Autel, including their brand, frequency band, and signal strength.
At the same time, it suppresses flight control, video transmission, and navigation signals across eight core frequency bands, forcing the target UAV to hover, return-to-home, or land.
With full coverage across eight frequency bands and high mobility, the device provides a “detect–countermeasure” closed-loop airspace protection solution for scenarios such as single-person patrols, temporary security, and emergency response.
2. Terms and Abbreviations
l Device: Handheld Detection, Jamming & Spoofing Integrated Device DR300-ABC
l Vendor: Refers to the seller or manufacturer providing the device
l User: Refers to individuals or organizations purchasing the device for relevant projects
l LSS UAV (Low, Slow, and Small UAV): UAVs with low flight altitude, slow speed, and small size, typically used for low-altitude operations or illegal activities
l Detection-Jamming-Spoofing Integration: The device's capability to simultaneously perform UAV signal detection, identification, direction-finding, RID (Remote ID), analog video interception, and spoofing functions, along with radio jamming Jammings, without requiring additional equipment
l Direction-Finding Function: The capability to determine target azimuth in real-time and display signal strength by receiving UAV signals
l JCR (Jamming-to-Communication Ratio): The power ratio of jamming signal to UAV communication signal, reflecting jamming effectiveness; higher ratios indicate stronger jamming effects
3. Product Overview
This product consists of a UAV spectrum detection system, radio jamming system, spoofing interference system, analog video interception system, and remote identification positioning system. It can detect, identify, and jam counter-UAV operations, enabling UAVs to hover in place, make forced landings, or return home, effectively protecting low-altitude airspace security and preventing UAVs from entering protected zones. It features excellent detection and defense performance with long-range operational capabilities.
3.1 Product Name
Handheld Detection, Jamming & Spoofing Integrated Device
3.2 Product Model
DR300-ABC
3.3 Product Application
This product integrates full-chain low-altitude defense and visual evidence collection core functions. It is an 8-band full-coverage handheld detection-jamming-spoofing integrated device. The device achieves omnidirectional detection across multiple frequency bands from 400 MHz to 6200 MHz, with 360° precise target signal acquisition. It rapidly completes UAV brand identification, model matching, frequency band analysis, and signal strength assessment. Through professional RID (Remote ID) radio frequency identification technology, it achieves precise target identity locking.
On the Jamming side, the device supports precise jamming across 8 core Jamming frequency bands. It can flexibly switch between standalone communication jamming, standalone navigation jamming, full-band jamming, and intelligent spoofing modes. Combined with built-in analog video interception functionality, it captures UAV video transmission images in real-time, constructing a visualized operation and evidence collection closed-loop.
The entire unit operates with instant-on detection and instant-detection Jammings. It is widely applicable to scenarios including individual patrols, large-scale event security, critical facility perimeter protection, and emergency incident response, effectively preventing illegal close-range UAV intrusion and achieving integrated operations from detection, identification, direction-finding, interception to spoofing, jamming, and evidence collection.
3.4 Technical Parameters
|
Product Name |
Handheld Detection, Jamming & Spoofing Product |
|
Product Model |
DR300-ABC |
|
Power Consumption |
≤250 W |
|
Detection |
Full-band scanning detection: 400 MHz～6.2 GHz |
|
Detection Range |
≥2 km (depending on operating conditions and model type) |
|
Jamming Range |
≥1.5 km for remote control link (with line-of-sight and JCR 2:1, typical model: DJI Mavic 3); ≥2 km for satellite navigation link (with line-of-sight environment) |
|
Satellite Signal Reception Frequencies |
BDS-B1, GPS-L1C/A, GLONASS-L1, Galileo-E1 |
|
Maximum Transmit Power |
≥ 20 dBm |
|
Power Adjustment Range |
80 dB, minimum resolution 1 dB |
|
Power-On Startup Time |
≤40 s |
|
Satellite Signal Synchronization Time |
≤120 s |
|
Spoofing Range |
≥2 km (no-fly zone) |
|
FPV Video Interception |
≥1.5 km |
|
RID Positioning Range |
≥2 km |
|
Jamming Frequency Bands |
433 MHz, 915 MHz, 1.4 GHz, 2.4 GHz, 5.2 GHz, 5.8 GHz |
|
Channel Power |
420 MHz～440 MHz (20W), 830 MHz～940 MHz (20W), 1430 MHz～1444 MHz (20W), 2400 MHz～2484 MHz (50W), 5150 MHz～5250 MHz (30W), 5725 MHz～5850 MHz (50W) |
|
Interception Channels |
8 channels |
|
Jamming Azimuth Coverage |
≥30° |
|
Display Screen Size |
≥4.3 inches, capable of simultaneously displaying ≥10 UAV detection results |
|
Status Indication Function |
Display screen shows detected UAV brand, electronic fingerprint, UAV frequency band, FPV UAV video, pilot position (mobile phone navigation), and other information |
|
Direction-Finding Function |
Equipped with direction-finding capability. When UAV is detected, one target can be selected for direction-finding, with real-time detection and display of the target's signal strength |
|
Jamming Modes |
For data link and telemetry/control links: including but not limited to barrage jamming, smart jamming; for satellite navigation links: capable of barrage jamming against tri-mode composite (GPS, GLONASS, BeiDou) civilian satellite navigation codes |
|
RID Function |
Supports large RID acquisition and parsing capability, capturing pilot position |
|
Detection Angle |
0°~360° |
|
Alarm Alert Function |
Audio alarm prompt upon UAV detection |
|
Jamming Function Check |
Capable of transmitting wireless jamming signals to cause UAV hover, return home, or forced landing |
|
Frequency Band Switching Function |
Selectable standalone communication jamming, standalone navigation jamming, or full-band jamming |
|
Operating Temperature |
(-40℃~+60℃) ±2℃ |
|
Weight |
≤9 kg (including battery) |
|
Dimensions |
770 mm × 150 mm × 370 mm (L×W×H) |
|
Battery Parameters |
Standard voltage 29.2 V, operating voltage range 25.9 V~29.4 V, capacity 10 Ah |
|
Battery Removable |
One-click plug-and-play battery pack, battery replacement time ≤5 s |
|
Multi-Function Rail |
Mountable with rangefinder telescope, high-intensity flashlight, and other detection equipment |
|
Standby Time |
≥20 h, with detection alarm function during standby |
|
Charging Function |
Supports AC220V charging (standard power adapter included), with battery level display function |
4. Product Features and Functions
l Full-Spectrum Omnidirectional Detection: Ultra-wide frequency coverage from 400 MHz to 6200 MHz, 360° omnidirectional scanning, millisecond-level capture of mainstream UAV and WiFi-type target signals.
l Precise Identity Identification: Supports UAV brand/model/frequency band/signal strength analysis, combined with professional RID radio frequency identification technology, achieving precise target identity locking and traceability.
l High-Precision Direction-Finding and Positioning: Real-time calculation of target signal direction and position, providing core data support for jamming decision-making and pilot tracking.
l Visual Evidence Collection Closed-Loop: Built-in analog video interception module, capturing UAV video transmission images in real-time.
l Multi-Mode Intelligent Jamming: 8 core jamming frequency bands, supporting flexible switching among four modes: standalone communication jamming, standalone navigation jamming, full-band jamming, and intelligent spoofing, enabling tailored responses to different threats.
l Integrated Portable Design: Handheld compact structure, instant-on detection and instant-detection jamming, no complex deployment required, adaptable to mobile scenarios such as individual patrols and emergency response.
l Full-Chain Operational Capability: Complete closed-loop workflow from detection → identification → direction-finding → interception → spoofing → jamming → evidence collection, achieving visualized, controllable, and traceable low-altitude security protection.
l Military-Grade Quality: Full aviation aluminum body, resistant to high and low temperatures, strong environmental adaptability.
l Customized Services: Tailored intelligent solutions based on customer requirements, providing optimal defense effectiveness.
5. Product Structure and Components
This product consists of a detection assembly unit, jamming assembly unit, analog video acquisition assembly unit, RID positioning and parsing assembly unit, spoofing assembly unit, control mainboard, power supply components, and others.
5.1 Product Six-View Drawing
|
|
|
|
|
|
|
|
|
5.2 Device List
|
Product name |
Product picture |
Number |
Size (mm) |
Weight (kg) |
|
|
1 |
Device host |
|
1 |
770 *150*370(L×W×H) |
9.0 |
|
2 |
Battery |
|
2 |
160×105×130(L×W×H) |
2.7 |
|
3 |
Strap |
|
1 |
/ |
0.25 |
|
4 |
Charger |
|
1 |
/ |
0.35 |
|
5 |
Aviation case |
|
1 |
790×410×200(L×W×H) |
5.75 |
6.Product Transportation Protection
Transportation and storage protection uses high-strength flight case packaging:
790mm × 440mm × 200mm (L × W × H)
